
62 WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure
NN47250-506 (324883-B Rev 02 Version 02.02)
Figure 13. External Antenna cables in the Enclosure
3 Obtain the AP mounting bracket from the AP kit.
4 Use two 6/32 screws to secure the mounting bracket to the standoffs in the enclosure as shown in
Figure 14
Figure 14. Mounting Bracket
5 Unscrew the Ethernet Gland nut on the outside of the enclosure.
6 Remove the split rubber washers from the Ethernet Gland nut.
7 Slide the Ethernet Gland nut onto the Ethernet cable.
Make sure the threaded end is facing the Ethernet cable connector on the enclosure.
8 Slide the rubber washers onto the Ethernet cable.
The rubber washers and gland nut on the Ethernet cable are shown in Figure 15 .
Kommentare zu diesen Handbüchern