Nortel WLAN Security Switch 2361 Installationsanleitung PDF herunterladen (Seite 48)

48 WLAN Series 2332 Outdoor Solution with Indoor Mounted AP

NN47250-506 (324883-B Rev 02 Version 02.02)

Figure 4. #8 Ground lead

Grounding principles

To connect the surge suppressor to ground, use the shortest and most direct run possible with #8 solid copper

wire (or equivalent). For exterior installations, weatherproof the coax connectors with a suitable mastic or

rubberized tape to prevent water infiltration. (see Figure 4 on page 48).

Warning! All wiring and cables to the Access Point, the surge suppressor and

the outdoor antenna should be routed separately. It is particularly important

that AC wiring or other outside cabling does not come in contact with the

Access Point, antenna cables or interface wiring.

Caution! The power source equipment connected to the Access Point, such as the

Wireless Security Switch or PoE injector, must be provided with a reliable earth ground to

insure safety of the system.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 119 120

Keine Kommentare

Nortel WLAN Security Switch 2361 Installationsanleitung Seite 48